top of page

The new UV LED lash extension system was developed by scientists and engineers utilizing LED light technology. It represents a revolution in the field of eyelash extensions, as the LED visible light is essential for curing the glue. Unlike the fast-drying conventional eyelash extension glue, the adhesive vapor emitted is no longer as intense. This innovative system requires significantly less glue compared to traditional methods, making it more cost-effective and offering a longer shelf life.

Safe and professional.

Beam Light system has been tested over 2 years in cooperation with external testing laboratories and is 100% safe for the human eye and skin. It complies with all current standards and requirements. Of course, the device is CE and FCC certified.

In summary, the BEAM LIGHT system solves ALL the problems that lash stylists usually have. That’s why we say: It is the future of eyelash extensions.

However, some lash artists still have doubts about this system. Here are a few frequently asked questions and answers that aim to address any concerns you may have. If you have any further questions, please don't hesitate to reach out to us.

lash fillr (32).png
Catie Logo Photos (2).png
WildKayte (3).png
Beamlight-Post-1.png
WildKayte (1).png

What is so Special about the Beam Light System?

✅ The eyelash glue is 100% cured immediately and customers are allowed to let water touch their eyelashes directly. There is no more “48h no water rule” anymore. With normal eyelash glue, misbehavior on the part of the customer can have a strong negative impact on the durability. With BEAM LIGHT, you no longer have to worry about this.

✅ The retention is EXTREMELY improved. The eyelashes last until the natural eyelash falls out. NO normal eyelash glue achieves such durability.

✅ Allergy risk is reduced by 80% because because the glue is directly cured, it no longer emits fumes. Normal eyelash adhesives take about 48 hours to cure completely and continue to emit fumes during this period.

✅ It no longer matters at all what your humidity level is or what the temperature is. The performance of your glue is ALWAYS the same – it doesn’t get runnier, it doesn’t pull strings, it doesn’t need to be changed every 15 minutes.

✅ Don’t worry: you can still remove the lashes normally with a classic remover. You can remove lashes that have grown out during refilling with tweezers in the same way as usual.

✅ It’s not an UV lamp, it’s an UV LED lamp. It doesn’t tan your skin.

✅ We are operating on a special wavelength of 395nm.

✅ We are using a certified UV Eyelash Glue and NOT a resin or gel.

✅ Our lamp has 6x less power than an average lamp with 36W for curing gel nails and 1000x less power than a professional solarium which often has 5000W.

WildKayte (8).png
WildKayte (8).png

Does UV light harm the eye?
it won’t hurt your eyes! You just have to make sure that neither you nor the customer look directly into the light. because the lamp shines from above onto the closed eyelid and never directly into the eye.
Also you as a lash artist have no direct eye contact with the light and are additionally protected by our UV safety glasses.
If you expose the open eye to UV light for a longer period of time, for example minutes: yes!
We only expose to the closed eye for 1-3 seconds. Therefore: no!
(Sunbeds also have UV light. A tan/pigmentation only starts after about 8 minutes).

What about the retention?
The lashes last until the natural lash falls out as part of the natural hair growth cycle.

Does this have the CE certification?

Yes, of course have! the UV lamp has through the EN62471 safe test in CE Certification. also passed the FCC, ROHS Certificates.

​

What distance should the light be from the eye?
The lamp head should be about 10 -15cm away from the natural lashes and the glue dot should be in the center of the light cone.

​

How is the UV light released?
The UV light can be initiated via the foot pedal.

Could I know the specifications of the UV light?
yes, of course.
– Wavelength: 395nm

Does the UV lash glue contain cyanoacetate?

Although it is a UV LED system, our glue still contains cyanoacrylate. In the course of our extensive series of tests, we found that completely cyanoacrylate-free glues can be manufactured but perform poorly in practice. Curing would be more difficult and slower. Also, the room would have to be heavily darkened to prevent the glue dot from curing directly.

Our glue does not have these problems. Curing is lightning fast and the room does not need to be darkened either.

Can Allergies occur?

Our experience shows that up to 8 out of 10 clients who previously had an allergy and therefore could no longer wear lashes are symptom-free with our Beam Light System. This means that allergies no longer occur.

In rare cases, however, allergies do occur, and these are extremely sensitive customers. So there is no guarantee for being “allergy-free”, but our system shows a high effectiveness with many female customers!

For who should the system not be used for?

The treatment of pregnant or breastfeeding persons may only be carried out after prior consultation with a doctor. In case of doubt, treatment should be avoided.

The system should not be used if the treated person has any of the following symptoms in the area of the eye where the light from the system may shine: abrasions, keloid – or unhealed scars, herpes, psoriasis, other infectious or inflammatory skin diseases, fungal infections, wounds, sunburn, neurodermatitis, skin cancer.

The system should not be used if the user or the person being treated has the following symptoms:

Epilepsy, polymorphous light dermatosis, photosensitivity, radiation or chemotherapy, hemophilia.

The system should not be used if the user or the treated person is taking photosensitizing medication such as neuroleptics, systemic dermatics and antiepileptics.

bottom of page